MGE UPS Systems 66102 Uživatelský manuál Strana 36
- Strana / 118
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Network Management Card
– User Manual 34003991EN/EC Page 36/118
"Immediate On": A sequence to switch on output power is launched immediately. The output is re-powered and the
systems supplied start up correctly.
"Delayed, safe power down": This is the same switch off sequence as for the "Safe power down" command, but
postponed by the number of seconds programmed in the "Off Delay" parameter.
"Delayed, safe power down & reboot": This is the same switch off then on sequence as for the "Safe power down &
reboot" command, but postponed by the number of seconds programmed in the "Off Delay" parameter.
"Delayed On": This is the same switch on sequence as for the "Immediate On" command, but postponed by the
number of seconds programmed in the "On Delay" parameter.
The Save button saves the Off Delay, Toggle duration and On Delay parameters on the card.
Security: The administrator must click on Save and enter his/her login/password to save modifications or run
commands. The default login and password by default are: admin/admin
- Network 1
- Management Card 1
- Contents 2
- DDITIONAL 4
- EB PAGES 4
- ABLES OF ALARMS AND EVENTS 4
- OBJECTS 4
- 1 EATON Network Solution 5
- 1.1.4 Connection 7
- 1.3 Technical data 10
- 1.3.2 EMC Compatibility 10
- 1.3.3 Configuration 10
- 1.3.4 Administration 11
- 1.3.5 Network 11
- 1.3.6 Environment sensor 11
- 1.3.8 Default parameters 13
- 2 Installation 14
- 2.3 Installation in the UPS 15
- 3 Configuration 17
- 4.2 UPS 21
- 4.2.1 UPS properties page 21
- 4.2.1.3 Viewing the modules 28
- 4.2.1.4 Viewing the alarms 30
- 4.2.2 On-line help 33
- 4.2.3 UPS control 34
- 4.2.5 Shutdown parameters 38
- 4.2.6 Measurements 40
- 4.2.7 Event log 41
- 4.2.8 System log 42
- 4.3 Notification 43
- 4.3.1 Email Notification 43
- 4.4 Configuration 47
- 4.4.1 Network settings 48
- 4.4.2 System 50
- 4.4.5 Access control 55
- 4.4.6 Date and time 57
- 4.4.7 Firmware upload 59
- 4.5.1 Characteristics 60
- 4.5.2 Environment Status 61
- 4.5.3 Environment Settings 62
- 4.5.4 Log 64
- 5 Server protection 65
- (If Capacity under) 66
- 5.1.1.4 Shutdown duration 67
- 5.1.2 Controlled outlets 68
- (Shutdown after) 69
- 5.3.1 Shutdown Duration 71
- 5.3.2 Settings 71
- 6 Configuration via RS232 72
- 7.1 Presentation 77
- 7.1.1 Overview 77
- 7.1.2 Functions 77
- 7.2 Installation 79
- 7.2.2.1 RS485 connection 80
- 7.3 Additional Web pages 90
- 7.4 JBUS table 91
- 7.4.1.2 Measurements table 92
- 7.4.2.1 Status table 93
- 7.4.2.2 Measurements table 94
- 7.4.3.1 Status table 95
- 7.4.3.2 Measurements table 96
- 7.4.4.1 Status table 97
- 7.4.4.2 Modular fault table 98
- 7.4.4.3 Measurements table 100
- 7.4.5 Sensor data 102
- 7.4.5.2 Measurements table 103
- 7.4.6 Other data 105
- 8 Appendices 106
- 8.1.2 Table of UPS events 109
- 8.2 SNMP objects 112
- 8.2.1 EATON MIB 112
- 9 Glossary 117
Saeco HD8753/94 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Saeco HD8753/94.
Wir stellen 5 PDF-Handbücher Saeco HD8753/94 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Komentáře k této Příručce